Expanded Poly Expansion Joint with 1/2″ Peel
This is a flexible, lightweight, non-staining, polyethylene, closed-cell expansion joint filler. It is a chemical-resistant, ultraviolet stable, non-absorbent, low density, cost-effective, compressible foam that offers an extended service life in both interior and exterior applications.
This expansion joint is supplied with a convenient, pre-scored removable strip to provide a uniform sealing reservoir in the joint. It also serves as a sealant bond-breaker and provides a cost-effective alternative as an expansion joint in all concrete paving projects. It is compatible with all currently available cold-applied sealants.
- Expansion joint is also available in 3/8in. & 1/2in. thickness and from 2in. up to 48in. wide
- Extruded from high-quality polyethylene foam
- Peel-Off Strip: Standard on each roll, but can be special ordered without
- Very Flexible: Will not break or crack when used around curves or columns
- Lightweight: Approximately 10 times lighter than traditional expansion joint products
- Durable: With near zero water absorption, it will not rot out of the joint over an extended period of time.
- Economical: Easily cut and handled on any jobsite
| Order Code | Product Description | Packaged | Min Order |
| STRIP123 | 1/2″x 3″x 50′ w/ 1/2″Peel | by roll | 1 roll |
| STRIP12312 | 1/2″x 3.5″x 50′ w/ 1/2″Peel | by roll | 1 roll |
| STRIP124 | 1/2″x 4″x 50′ w/ 1/2″peel | by roll | 1 roll |
| STRIP126 | 1/2″x 6″x 50′ w/ 1/2″peel | by roll | 1 roll |