Drainage Systems
A. Grate retaining clips are included with each drain. Removeable for easy cleaning.
B. Standard grates are constructed from 3/16″ steel bars. Cast iron and heavy duty grates are also available.
C. Components are arc welded for maximum strength.
D. Drain sections bolt together for easy installation.
E. Open bottom in Red-E-Form drain allows on-site grading, eliminates the need for sloped footers.
F. Roll formed construction provides consistent quality and strength.
G. Each drain is dip-coated for lasting protection.
H. Anchor clips make positioning easier, prevent heaving under extreme conditions.
I. Installation requires no footers or forms. Install with a single pour.
For more information please visit Riverside Steel website or call our office at 800.334.0541
Red · E · Form – Commercial and Industrial Applications
From gas stations and parking lots to factories and garage floor drains.
Red-E-Form trench drains are designed for virtually any heavy duty application where durability and performance are a must. Manufactured as complete units, Red-E-Form trench drains offer unusually easy installation and dependable, trouble-free operation.
Easy installation.
Completed Red-E-Form trench drain units bolt together so that the entire system can be connected before being positioned in the drain trench. This ensures fast, easy installation, provides more rigid support and allows greater control in placement.
No multiple sloping.
Unlike many other trench drains, the Red-E-Form system does not require multiple surface sloping. Since the drains are bottomless to allow on-site grading, you have unlimited grade/distance potential. Therefore, you can run a single drain the entire length of the trench drain area and eliminate the need for multi-sloping.
Single pour installation, no footers or forms.
Because the drains are produced with an open bottom, the need for sloped footers and forms is eliminated. All you need to do is position the assembled system in the trench, and pour and grade as you go. You make the footer, form and grade with one pour. And that saves you time, money and materials.
Anchor clips: an added benefit.
Anchor clips keep the components in position during installation and prevent the system from heaving – even under the most extreme conditions – when the job is complete.
E · Z · Drain – For any Residential Application
Same benefits, smaller size.
E-Z-Drain systems offer the same easy installation, effective maintenance free performance and rugged construction of Red-E-Form systems, but have been specifically designed for residential use. E-Z-Drain systems are available only in 6″ widths and are constructed with a roll-formed bottom plate. E-Z-Drains are designed for handling smaller surface areas, such as driveways and garages.
Features | Applications |
Modular design | Driveways and Garages |
Easy to install and maintain | Sidewalks and Patios |
Complete pre-engineered solution | Landscaping |
Formed in bottom | Swimming Pools |
Flow rates to 7 gallons/second | Car Washes |
Sections bolt together for tight fit | Barns and Livestock |
Rugged all steel construction | Greenhouses and Nurseries |
Gas Stations | |
Restaurants | |
Car Dealerships |
CODE |
PRODUCT | SIZE |
TD1248T1 | RED-E-FORM | 12”W x 48”L |
TD0672T1 | EZ-DRAIN | 6”W x 72”L |
TD0660T1 | EZ-DRAIN | 6”W x 60”L |
TD0648T1 | EZ-DRAIN |
6”W x 48”L |
Painting
The entire assembly is dipped in a high adhesion, rust resistant coating for complete protection. Adds years to the life of the system.
Accessories
For faster drainage, greater water control, sumps are available for each system. Trash sumps are also available for easy removal of debris.
Assembly
Components are jig assembled to ensure consistent quality and arc welded for optimum strength.
Materials
Drains are roll-formed from 13 gauge steel for uniform quality and strength.
Grates
Strong, 3/16″ steel bar grates are standard on both systems. Heavy duty, reinforced steel grates are available for applications subjected to heavy equipment and will withstand continuous 40 ton traffic.Grates are included with each unit.
TR1 Trench Drain with ADA Grate
- Comes completely assembled and ready to install
- TR1 is 6.75″ wide at the base, 36″ long on each side, and 5″ deep.
- Tuf-Tite’s TR1 is made of HDPE and features snap-together construction
- Includes trench, grate, snap-on end caps, and easy-out bottom drains for 2″, 3″, or 4″ pipe.
- Available in gray body with black or gray grate
- Molded-in ribs for exceptional rigidity.
- 235 p.s.i. industrial strength
- H-20 Wheel Load Rating (Heavy Traffic).
- Class-C (For use with pneumatic tired vehicles only).
- Grate complies with Americans with Disabilities Act.
For more information please visit the Tuf-Tite website or call our office at 800. 334. 0541
CODE |
PRODUCT | PCS/BOX |
TR1 |
3 ft Drain w/ Grate | |
TR1-GCF |
Female Gender Change |
16 |
TR1-GCM | Male Gender Change |
16 |
TR1-90 |
90° Angle with Grate |
16 |
TR1-D4 |
4” End Drain |
16 |
MF4 |
Pipe Connector 4” S&D- 4” Corrugated |
250 |
Great for:
- Residential driveways
- Garage floors
- Swimming pool decks
Use on:
- Wareouse factory floors (holds up to fully loaded forklift traffic)
- Loading docks
The MEAGARD drainage channel system is a ready-to-install channel made of polymer concrete. It is particularly suitable as a drainage solution for driveways.
- Suitable for light vehicle traffic
- Load class: A, B, C
- Grates overlay channel edge to protect edge and provide an aesthetic finished appearance
- 4″ bottom or 3″ or 4″ endplate outlet connection
- No gradient
- Available with a variety of gratings (galv. steel slotted, cast iron)
For more information please visit the Josam website or call our office at 800. 334. 0541
Paver Block, Stone walkway perimeter
- Slotted galvanized overlay grating “SNAPS” in/out for easy maintenance
- Overlay grate protects polymer concrete edge
Delivery Entrances, Garage areas
- Select black ductile iron grate for heavy load areas
- 2 Step channels allow extended runs to incorporate slope
CODE |
PRODUCT |
MG19 |
19.7” Channel w/ Galv. Grate |
MG39 |
39.4” Channel w/ Galv. Grate |
MGC |
39.4” Channel Only |
MGC19 |
19.7” Channel Only |
MGG |
39.4” Galvanized Grate Only |
MGG19 |
19.7” Galvanized Grate Only |
MGCIG |
Cast Iron Grate 19.7” |
MGEC |
Solid End Cap |
MGECN |
End Cap w/Nipple |
MGLM |
Locking Mechanism |