Weep Screed 7/8″
Weep screed is a type of flashing installed at the base of an exterior stucco wall. It serves to keep moisture away from the framing of the walls. Metal Foundation Sill Screed forms a stucco stop and screed at the sill plate line in exterior stucco applications. Properly performing weep screed will keep excessive moisture from pooling at the base of the stucco, which leads to possible wood damage, rot, mold, and other problems.
- Features a 3-1/2” nailing flange which serves as a straight-edge stop at the sill plate line and flashing when water-resistant paper or paperbacked lath is installed over flange.
- Punched with holes which enable keying as well as moisture weeping.
- Available in galvanized steel in 10 ft. lengths.
|
Order Code |
Product Description | Packaged | Min Order |
| WEEPS78 | Weep Screed 10′ GALV. 7/8″ | 10/bundle |
1 bundle |
Weep Holes
Polyethylene weep holes are tubes made from medium-density polyethylene that allow water and moisture to drain out of masonry cavity walls
- 3/8″ O.D. x 1/4″ I.D. x 4″
|
Order Code |
Product Description | Packaged | Min Order |
| WEEP | Weep Holes (Clear, Plastic) | 1000/box |
1 box |
Cell Vents
Cell Vent (ultra violet resistant polypropylene co-polymer) consists of many small, adjacent passageways bonded together in one unit.
- Cellular composition provides easy drainage for moisture along the full height of the head joint.
- Standard size : 3/8″W x 2-1/2″D x 3-3/8″L
|
Order Code |
Product Description | Packaged | Min Order |
| BMCVG | Cell Vent (Gray) | per vent |
1 vent |