DEL VAL Non-Fibrated Roof/Foundation Coating
Del-Val Non Fibrated Roof / Foundation Coating is a non-fibrated asphalt coating that is used to prevent moisture penetrating through foundation walls and protecting a variety of roof surfaces.
After the product is applied it forms a smooth flexible shell that helps resist the entrance of moisture through foundation walls.
On the roof Del-Val Non Fibrated Roof Coating forms a weather resistant film that has excellent adhesion to most roof surfaces.
For more information please visit United Asphalt’s website here
Application: Can be applied using: brush, roller or heavy duty spray equipment. Allow 24 hours drying time before backfilling against the foundation walls. Do not apply over wet/damp or frost covered surfaces.
Coverage: Masonry Surfaces: apply at the rate of approximately 1 to 1.5 gallons per 100 sq. ft.
Roofing Surfaces (smooth asphalt surfaces): apply at the rate of approximately 1 to 2 gallons per 100 sq.ft.
Must stir coating before using.
Cleanup: Clean tools with mineral spirits, taking necessary precautions when handling combustible liquids.
| Order Code | Product Description | Packaged | Min Order |
| FC5 | Non-Fib Foundation/Roof Coating | 5 gal pail | 1 pail |
| FC55 | Non-Fib Foundation/Roof Coating | 55 gal drum | 1 drum |
DEL VAL Roof Master Flashing Cement
Roof-Master All Weather Flashing Cement is unique high quality flashing cement that has been manufactured using the highest quality chemical ingredients. Its flexible smooth trowel consistency makes this product ideal for patching emergency holes and cracks in roofs. Roof-Master All Weather Flashing Cement is ideal for sealing emergency leaks to both wet and dry roof surfaces and has excellent underwater adhesion.
For more information please visit United Asphalt’s website here
Preparation: Surface must be clean and free of dirt, dust, oil or grease and be free of any other foreign matter that would interfere with good adhesion. In colder climates we recommend storing the product at room temperature for 24 hours prior to application.
Application: Apply with a trowel or putty knife. Spread Roof All Weather Master Flashing Cement to approximately 1/8” thickness and work thoroughly into the problem area. Repairing cracks and blisters: if the area is 1/4”wide to 2” long apply United Asphalt Cotton or Fiberglass fabric for reinforcement then cover with additional cement.
Coverage: Approximately 8 gallons per 100 sq. ft. (per coat) Code Approvals/Compliance: This product meets or exceeds the requirements of ASTM 4586 Type 1 and ASTM D-3409
Cleanup: Clean tools with mineral spirits, taking necessary precautions when handling combustible liquids.
Precaution: DO NOT THIN. DO NOT HEAT CONTAINER. DO NOT store in an area where temperatures exceed 120°F.
V.O.C. Less than 300 g/L
| Order Code | Product Description | Packaged | Min Order |
| RCE5 | Roof Master Flashing Cement | 5 gal pail | 1 pail |
MasterSeal HLM5000 (Sonoshield HLM5000)
HLM 5000 Roller Grade Liquid, Cold-applied Elastomeric Waterproofing is a one-component, moisture-curing, bitumen-modified polyurethane elastomeric waterproofing membrane for exterior below-grade or between-slab applications.
- Standard and high-build systems: Provides specification versatility and extended warranty
- Waterproof: Protects concrete structures from water penetration
- Elastomeric: Permits expansion and contraction
- Wide service-temperature range: Suitable for all climates
- Chemical resistant: Resists bacterial attack and many acids, alkalis, and salts
- Seamless cold-applied membrane: Eliminates lapping, seaming, and precutting
- Asphalt-modified polyurethane: Requires no hot-melt equipment
| Order Code | Product Description | Packaged | Min Order |
| HLM5000 | MasterSeal HLM5000 5-gal | per pail | 1 pail |
Karnak #112
Karnak #112 Foundation & Roof Coating is a non-fibered asphalt coating for preventing moisture penetration through foundation walls and protecting a variety of roof surfaces. The finished coating forms a smooth, tough, flexible film that serves to help retard the entrance of moisture into or through teh foundation wall. On the roof it helps to extend the life of a variety of roofing systems. If a hydrostatic pressure condition is present against the foundation wall, Karnak recommends using a Karnak waterproofing product such as Karnak 88R Rubberized Waterproofing (Aqua-Block), or Karnak 229AR-Elastomeric.
For more information please visit the Karnak website here
Karnak #112 Foundation & Roof Coating can be applied on exterior below grade and interion above grade block and masonry walls where no hydrostatic pressure is present. Use to coat all types of smooth surface asphalt roofs. Can also be used to protect wood and metal above or below grade.
| Order Code | Product Description | Packaged | Min Order |
| KAR112 | KARNAK #112 Foundation Coating 5-gal | per pail | 1 pail |
Karnak #19
Karnak #19 Ultra Flashing Cement is the next generation flashing cement. Scientifically compounded with a selection of rubber reinforced asphalt, mineral fibers, and refined solvents. Karnak #19 Ultra is manufactured to a heavy pliable consistency for ease of application by trowel. #19 Ultra provides a durable elastomeric coating of greater strength, excellent adhesion and high resistance to water and weathering. Karnak #19 Ultra is composed of special chemical ingredients which give it a unique water displacement quality (Wet/Dry). Karnak #19 Ultra dries to a tough, flexible, waterproof and corrosion proof rubber coating which gives maximum protection and excellent performance over wide ranges of temperature and weather conditions. Karnak #19 Ultra is available in 3 consistencies: Summer, Semi and Winter.
For more information please visit the Karnak website here
- Rubberized – elastomeric
- Wet or dry application
- Improved low-temperature flexibility
- Improved water and weather resistance
- Will not shrink or crack
- Smooth, easy to apply rubber-like trowel consistency
- Excellent adhesion
- Excellent resistance to flow (sag) at high roof temperatures
- Ready to apply – no mixing required
- Greater strength
- VOC compliant
- ASTM compliant
| Order Code | Product Description | Packaged | Min Order |
| KAR19 | KARNAK #19 Ultra Rubberized Flashing Cement 5-gal | per pail | 1 pail |
Karnak #88
Karnak #88R Rubberized Waterproofing is a solvent based asphalt compound, spray grade, manufactured with selected asphalts, stabilizers, polymer modifiers and mineral spirits. Karnak #88R Rubberized Waterproofing is a multi-purpose, cold applied protective waterproofing tht dries to a tough, durable and flexible coating that gives excellent performance over a wide range of temperature and weather conditions. Karnak #88R exhibits excellent resistance to acids and alkalis in soil and in the environment.
For more information please visit the Karnak website here
Karnak #88R Rubberized Waterproofing is designed to waterproof masonry and concrete exterior below grade surfaces and interior surfaces above grade. Karnak #88R also functions as a vapor barrier and air barrier. This product is suitable as a general protective coating for wood, steel and for all backup materials for masonry such as stone, brick and concrete. This protective coating also helps to control moisture and inhibit air leakage in buildings as specified in a number of building codes.
| Order Code | Product Description | Packaged | Min Order |
| KAR18 | KARNAK #88 Rubberized Waterproofing 5-gal | per pail | 1 pail |
Karnak #86AF
Karnak #86AF Fibered Trowel Mastic is manufactured from a blend of selected asphalts, fibers, stabilizers, fillers and solvents. Karnak #86AF Fibered Trowel Mastic is a heavy bodied product which dries to a tough, flexible and elastic protective coating. Karnak #86AF Fibered Trowel Mastic is highly resistant to the penetration of water and moisture over a wide range of temperature and service conditions. Karnak #86AF Fibered Trowel Mastic has excellent resistance to most acid, alkali, and salt spray solutions.
For more information please visit the Karnak website here
Karnak #86AF Fibered Trowel Mastic is especially recommended for application as a protective coating for exterior masonry walls below grade and exterior face of interior walls (cavity wall construction), and as a dampproofing product for retaining walls, bridge abutments and steel panels. It is also used for the coating of interior faces of exterior masonry walls above grade, and for all back-up material for masonry, such as stone, brick or concrete. Karnak #86AF Fibered Trowel Mastic can be used for waterproofing when used in conjunction with a multi-membrane application.
| Order Code | Product Description | Packaged | Min Order |
| KAR86 | KARNAK #86AF Trowell Mastic 5-gal | per pail | 1 pail |