Diamond Mesh Lath
- Manufactured by slitting and stretching galvanized steel to form small opening to allow the keying of plaster so it will bond to the lath.
- Each sheet has square ends and smooth parallel edges for fast, easy handling and installation.
- Diamond Mesh Lath can be bent easily to create curved surfaces.
| Order Code | Product Description | Packaged | Min Order |
| GALV25 | 2.5 Galv.Metal Lath 27″x 96″ | 10/bundle | 1 bundle |
| GALV34 | 3.4 Galv.Metal Lath 27″x 96″ | 10/bundle | 1 bundle |
Self Furring Diamond Mesh Lath
- Codes require metal lath used over solid surfaces to be furred approximately ¼ inch away from the wall to allow for the proper stucco keying behind the lath.
- Self-furred diamond mesh lath has a surface studded in dimples or embossed “V” groove that provide the required ¼ inch of furring.
- Fastener placement should be arranged so as not to negate the furring mechanism.
| Order Code | Product Description | Packaged | Min Order |
| GALVSF25 | 2.5 Galv.Metal Lath *SELF-FURING* | 10/bundle | 1 bundle |
| GALVSF34 | 3.4 Galv.Metal Lath *SELF-FURING* | 10/bundle | 1 bundle |
Plaster Reinforcement and Beads
X-1 CORNER BEAD
- This is the standard accessory for providing exterior corner protection and providing a reliably straight ground for screeding.
- The 3″ expanded mesh wings are easily flexed to adapt to framing irregularities and to match appropriate screed heights.
- Furnished in galvanized steel and zinc (99% pure) alloy.
| Order Code | Product Description | Packaged | Min Order |
| X1 | X-1 GALV. Expanded Corner Bead 10’ lengths | 300’/box | 1 box |
X-66 Casing Bead
- Casing bead is used as a plaster stop, screed ground, as exposed trim around doors and windows, and as a base screed.
- Available in galvanized steel and zinc alloy.
- The expanded flange width is 3 inches.
| Order Code | Product Description | Packaged | Min Order |
| X66 | X66 GALV. Casing Bead *1/2”* 10’ lengths | 300’/box | 1 box |
| X66* | X66 GALV. Casing Bead *3/4″* 10’ lengths | 300’/box | 1 box |
#15 CONTROL JOINT
- Designed to provide for movement to accommodate expansion and contraction caused by initial stucco shrinkage and minor thermal movement.
- Produced in galvanized steel and zinc alloy in 10’ lengths.
| Order Code | Product Description | Packaged | Min Order |
| EJ15 | #15 GALV. Control Joint *1/2”* 10’ lengths | 240’/box | 1 box |
| EJ15* | #15 GALV. Control Joint *3/4″* 10’ lengths | 240’/box | 1 box |